Product ID:SPEEDHIDE S/G LTX H&T PAINTS, 6-903
MSDS Date:06/04/1990
FSC:8010
NIIN:00N068323
MSDS Number: CBHMT

PPG INDUSTRIES INC

250 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555; 800-441-9695

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

ZINC OXIDE (SARA 313) (CERCLA)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 60-65%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

DIOXIDE DUSTS FROM COATINGS IS VERY

RTECS: 9999999ZZ

SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ

CORROSIVE MATERIAL, PERSISTENT SKIN/EYE

RTECS: 9999999ZZ

EXPOSURE LIMITS, LEL BELOW STATED LIMIT & TO REMOVE

RTECS: 9999999ZZ

SURFACES COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: HARMFUL/FATAL IF SWALLOWED.
EYE: CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL
DISTURBS MAY INDICATE EXCESS EYE CNTCT. SKIN: MAY CAUSE SLIGHT
IRRIT. DRYNESS, ITCH, CRACKING, BURNING, REDNESS & SWELL ARE
CNDTNS ASSOC W/EXCESS SKIN CNTCT. INHAL: VAP & SPRAY MIST MAY BE
HARMFUL IF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INHALED. CHRONIC: AVOID LONG TERM &
RPTD CNTCT. PROD CNTNS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE
QTYS OF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED LUNG
TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF THIS PIGMENT INDICATE
NO INCRD RISK OF CANCER FROM EXPOS. POTNTL FOR INHAL OF TITANIUM
(ING 6)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RES P & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY
OF FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD CNTCT POIS CTL CTR,
EMER ROOM OR MD IMMED. HAVE MSDS INFO AVAIL. INGEST, EXCESS EXPOS
TO (ING 8)

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM
OR UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA (SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILDUP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER AB SORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING MIX
MAY HAVE HAZS OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF LISTED INGREDS BELOW LOWEST SUGGESTED (ING 9)
Protective Gloves:PVA, NEOPRENE RUBBER OR LATEX RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WEAR PROTECTIVE CLOTHING INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS IIIB COMBUST LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZS ARE PREF. EXPLO HAZ: SURFS. TOX GASES MAY FORM WHEN PROD IS
CONTACTED BY FLAME OR HOT SURFS. HAZ DECOMP PRODS: FUMES INCLUDING
CARBON MONOXIDE.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<18
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.3
Evaporation Rate & Reference:<36 (BUOAC=100)
Solubility in Water:<64%
Appearance and Odor:VISCOUS LIQUID WITH ODOR CHARACTERISTIC OF LISTED
SOLVENTS.
Percent Volatiles by Volume:<71

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING OR FLAME CUTTING ON SURFS COATED W/PROD
MAY PRDCE (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.